how to remove gatehouse deadbolt

The Gatehouse Deadbolt: A Step-by-Step Guide to Removal

Have you ever encountered a stubborn Gatehouse deadbolt that seems impossible to remove? Whether you are replacing it or performing routine maintenance, removing a deadbolt can be a real challenge. In this expert guide on gatehouse deadbolt removal, we will walk you through the entire process step-by-step. Our aim is to address the common concern of how to remove a gatehouse deadbolt effectively.

As an expert in door hardware, I have encountered numerous situations where removing a deadbolt proved to be a cumbersome task. However, with the right approach and tools, the process can be simplified. Follow the steps below to remove your gatehouse deadbolt effortlessly:

Step 1: Gather the Required Tools

Before starting the removal process, it is crucial to have the necessary tools within reach. You will need a screwdriver, an Allen wrench, a hammer, pliers, and a lubricant.

Step 2: Prepare the Deadbolt for Removal

To start the removal process, close the door and position the deadbolt so that the latch retracts entirely. Next, locate the mounting plate on the interior side of the door, which is secured with screws. Using the screwdriver, remove these screws to detach the mounting plate from the door.

Step 3: Remove the Thumb Turn or Exterior Plate

Following the removal of the mounting plate, you’ll notice either a thumb turn or an exterior plate attached to the deadbolt. Depending on your specific deadbolt model, use an Allen wrench to unscrew the thumb turn or remove the screws holding the exterior plate. Set the thumb turn or exterior plate aside.

Step 4: Extract the Deadbolt Cylinder

With the mounting plate and thumb turn/exterior plate removed, the deadbolt cylinder will now be exposed. Look for a set screw securing the cylinder in place, typically found on the edge or top. Loosen this set screw using the appropriate sized Allen wrench and carefully slide the cylinder out of the door.

Step 5: Disassemble and Remove the Thumbpiece

To remove the deadbolt from the door completely, take the cylinder to a comfortable and stable work surface. Locate the mounting screws on the thumbpiece and use a screwdriver to detach it from the cylinder. Once removed, gently slide the deadbolt out of the door.

Step 6: Lubricate and Reassemble

Before installing a new deadbolt or reassembling the existing one, apply a lubricant to the moving parts to ensure smooth operation. This step increases the longevity and functionality of your gatehouse deadbolt. Once lubricated, reassemble the thumbpiece onto the cylinder and slide the cylinder back into the door, securing it with the set screw.


Removing a Gatehouse deadbolt doesn’t have to be a frustrating experience. By following this expert step-by-step guide, you can easily tackle deadbolt removal with confidence. From gathering the necessary tools to disassembling and reassembling the deadbolt correctly, this guide has covered all aspects of the removal process. Remember to always exercise caution and utilize the correct tools to avoid any unnecessary complications. With proper removal, you can seamlessly replace or maintain your Gatehouse deadbolt for added security and peace of mind.

Want to buy custom deadbolts? Visit Tiffanthy Deadbolt Locks Center to get customized deadblot locks s at competitive prices.

See More Blog Post! Visit our Blog.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *