Troubleshooting When Your Door Handle Won’t Open from Outside
We’ve all experienced that frustrating moment when we try to open a door from the outside and the handle just won’t budge. Whether it’s a home or office door, this issue can interrupt our daily routines and cause unnecessary stress. But fear not, as an expert in the field of door handle hardware, I’m here to help. In this article, we’ll explore the common reasons why your door handle might not open from the outside and provide you with troubleshooting techniques to get it working again.
1. Misaligned Door Strike Plate
One of the main culprits behind a door handle that won’t open from the outside is a misaligned door strike plate. This metal plate, attached to the door frame, serves as the point of contact for the latch when the door is closed. Over time, it can become misaligned due to frequent use or general wear and tear. To fix this issue, follow these steps:
- Remove the strike plate screws using a screwdriver.
- Gently tap the strike plate with a mallet to adjust its position.
- Replace the strike plate screws and tighten them securely.
2. Jammed Deadbolt Lock
If your door has a deadbolt lock and it’s not opening from the outside, it might be due to a jammed mechanism. The internal parts of a deadbolt lock can get clogged with debris or become misaligned over time, resulting in difficulty when trying to turn the knob. Here’s how to troubleshoot this issue:
- Insert a lubricating spray, such as WD-40, into the keyhole.
- Wait a few minutes to let the lubricant penetrate the lock’s internal components.
- Insert the key into the lock and gently turn it back and forth to dislodge any debris or realign the internal pins.
- Continue to spray and wiggle the key until the lock turns smoothly.
3. Worn-Out Latch
Over time, the latch of your door handle can become worn-out or damaged, causing it to get stuck and preventing the door from opening from the outside. If you suspect a worn-out latch, follow these steps to address the issue:
- Close the door and ensure that the latch properly aligns with the strike plate.
- Inspect the latch for any visible signs of wear or damage.
- If the latch appears worn-out, remove it from the door by unscrewing it.
- Install a new latch by aligning it with the existing holes and tightening the screws securely.
4. Faulty Door Handle Assembly
In some cases, the non-functioning door handle may be a result of a faulty handle assembly. Whether it’s a broken spring or a loose connection, addressing this issue requires a replacement of the handle assembly. Consult a professional or refer to the manufacturer’s instructions for assistance in replacing the handle assembly properly.
In conclusion, when your door handle won’t open from the outside, it can be a frustrating experience. However, armed with the troubleshooting techniques outlined in this article, you can confidently troubleshoot and resolve common issues associated with difficult door handles. By overcoming these obstacles, you’ll be able to regain unhindered access and enjoy the convenience that a properly functioning door handle provides.
Want to buy custom door handles? Visit Tiffanthy Lever Handle Center to get customized deadblot locks s at competitive prices.
See More Blog Post! Visit our Blog.